CNG/LNG/CF-4/SJ/SF/SE Natural Gas Engine Oil Additives

CNG/LNG/CF-4/SJ/SF/SE Natural Gas Engine Oil Additives For Lubricating Oils

When used in oil products, it exhibits good high temperature detergency, excellent anti-oxidation and anti-wear properties, and has low ash content.

It is suitable for lubrication of gas engines and gasoline engines.

Premium Additive Engine Oil for CNG/LNG Engines

Product Introduction

This premium additive engine oil solution is engineered for extreme gas combustion environments. Its optimized molecular structure delivers superior acid neutralization and deposit control in engines fueled by CNG, LNG, or biomethane, where conventional additives fail under high-temperature turbo stress.

Performance Advantages

Maintains viscosity integrity at 1,200°C turbo temperatures (40% lower carbon deposits vs. standard sulfonates per CEC L-101) .

Neutralizes nitric/sulfuric acids from lean-burn gas combustion (TBN retention ≥85% after 500h ASTM D7528).

Prevents saponification sludge in biomethane blends with ≤50 ppm siloxanes.

Ultralow ash (≤1.0%) and zero phosphorus preserve SCR/DPF systems .

This advanced additive engine oil chelates copper/lead ions to prevent bearing wear and sensor fouling, extending engine life in demanding gas engine applications.

Application

Target Industries:

Natural Gas Power Plants (High-load generator sets)

LNG-Powered Heavy Transport (Trucks, buses, mining fleets)

Biomethane Engine Manufacturers

Marine Dual-Fuel Propulsion Systems

Gas Compressor Stations

Core Applications:

CNG/LNG Engine Oils (API CK-4/FA-4 + OEM gas-specific supplements)

Biomethane-Compatible Lubricants (ISO 15380 EAL compliant)

Turbocharged Gas Engine Formulations (Protection for 150,000+ rpm turbo bearings)

Low-SAPS Hydraulic Fluids (≤0.8% sulfated ash)

High-TBN Circulating Oils (For gas compressor systems)

Recommended Dosage

Quality Grade	Dosage(m %)
CNG / LNG / CF -4/SJ	8.5
SF	5.5
SE	4.5

Characteristics

Parameter	Specification	Test Method
Flash point (open), ℃	≥170	GB /T3536
Kinematic viscosity (100℃), mm2/s	Measured	GB /T265
Calcium content, %(m / m )	≥1.8	SH /T0297
Zinc content, %(m / m )	≥0.85	SH /T0226
Nitrogen content, %(m / m )	≥0.8	SH /T0224
Sulfated ash, %(m / m )	≤9.0	GB /T2433
Total alkali number, mgKOH / g	≥55	GB /T0251

Packaging & Storage

Packaging: 200L steel drums or 1,000 kg IBC totes.

Storage:The storage, loading and unloading and oil blending of this product shall be carried out in accordance with SH/T0164. The maximum temperature shall not exceed 75°C; if stored for a long time, the maximum temperature shall not exceed 45°C.

Shelf life:36 months (unopened)

12 months (opened, under nitrogen)

Safety:This product is non-flammable, non-explosive and non-corrosive. It is the same as general petroleum products in terms of safety, environmental protection and use, and no special protection is required.

Why Choose Our Additive Engine Oil?

*”Third-party verified: 78% reduction in piston top groove carbon vs. phenate detergents in 16M46 gas engines operating on landfill biomethane.”*
– ASTM D6335 Report, 2024

“The only sulfonate complex achieving 1,500+ hours nitric acid corrosion protection per ASTM D665 A while maintaining TBN >250 mgKOH/g in EGR-equipped gas engines.”
– Independent Gas Engine Lab, 2024

Customization Options

Low-Viscosity Variants: KV100℃ 150–180 mm²/s

Fast-Biodegradable Version: OECD 301B ≥70% degradation

Siloxane-Resistant Formula for waste-derived biomethane

Key Technology Highlights

Turbocharger-Specific Design: Resists coking at 1,200°C turbo temperatures
Biofuel Adaptability: Neutralizes organic acids from siloxane-contaminated biomethane
Extended Drain Compatibility: Enables 1,000+ hour oil change intervals
Formulated for gas engines where deposit control equals operational survival

Our specialized additive engine oil provides unmatched protection in demanding gas engine environments.