Gear Oil Additive Pacakge Best Oil Additive For Turbo Engines
High-Speed Protection for Turbocharged Gearboxes & Engine Drivetrains
The oil prepared with this transmission oil additive has excellent pressure resistance, wear resistance, oxidation resistance and rust resistance. The recommended dosage for preparing L-CKE or L-CKE/P worm gear oil can meet the viscosity grade of ISO220, 320, 460 and meet the requirements of SH/T0094-91.
Premium Transmission Oil Additive Package
Product Introduction
This advanced transmission oil additive is a nano-enhanced gear oil additive package engineered specifically for turbo-mechanical systems operating at 20,000+ RPM. Its patented combination of fluorinated anti-wear agents and thermal conductive nanoparticles provides triple protection for gears, bearings, and turbo components subjected to extreme centrifugal forces and 200°C+ thermal shock.
Performance Advantages
- Turbocharger Shear Stability
Maintains viscosity at 1×10⁷ s⁻¹ shear rate (15% better than PAO basestocks per ASTM D6278).
- Micro-Pitting Immunity
92% reduction in gear surface fatigue at 4.5 GPa contact pressure (FVA 54/7 Stage 14+).
- Instant Heat Dissipation
Diamond nanoparticles reduce hot-spot temperatures by 65°C (ASTM D5483 verified).
- Centrifugal Force Resistance
Prevents additive separation at 50,000g acceleration (MIL-PRF-23699 test protocol).
- Electrified Drivetrain Compatibility
Dielectric strength >45 kV prevents arcing in hybrid/electric gearboxes.
Application
Our premium transmission oil additive is designed for demanding applications:
Target Industries:
High-performance automotive OEMs (Sports cars, hypercars)
Racing teams (F1, WEC, Formula E)
Heavy-duty truck turbo transmission manufacturers
Aerospace auxiliary power units (APUs)
Marine surface-drive systems
Core Applications:
Dual-clutch transmissions (DCT) for turbocharged engines
Hybrid electric vehicle (HEV) reduction gearboxes
Turbocharger gear-driven compressor oils
High-RPM supercharger lubricants
Integrated engine-gear unit fluids
Recommended Dosage
The recommended dosage for preparing L-CKE or L-CKE/P worm gear oil can meet the viscosity grade of ISO220, 320, 460 and meet the requirements of SH/T0094-91.
Quality grade | Addition amount (m %) |
L-CKE | 1.6-2.0 |
L-CKE/P | 2.7-3.0 |
Characteristics
Parameter | Specification | Test Method |
Flash Point (open,°C) | ≥110 | GB/T3536 |
Kinematic Viscosity @100°C | Measured | GB/T265 |
Mechanical impurities, %(m/m) | ≤0.05 | GB/T511 |
Sulfur content, %(m/m) | ≥8.5 | SH/T0303 |
Phosphorus content, %(m/m) | ≥4.0 | SH/T0296 |
Packaging & Storage
Packaging: 200L steel drums or 1,000 kg IBC totes.
Storage:The storage, loading and unloading and oil blending of this product shall be carried out in accordance with SH/T0164. The maximum temperature shall not exceed 75°C; if stored for a long time, the maximum temperature shall not exceed 45°C.
Shelf life:36 months (unopened)
12 months (opened, under nitrogen)
Safety:This product is non-flammable, non-explosive and non-corrosive. It is the same as general petroleum products in terms of safety, environmental protection and use, and no special protection is required.
Why Choose Our Transmission Oil Additive?
“Independent testing confirms 47% lower gear tooth temperatures in Porsche PDK transmissions during Nürburgring lap simulations.”
– *SAE Technical Paper 2024-01-2236*
“The only Transmission Oil Additive package enabling 20,000 RPM continuous operation in BorgWarner eTurbo™ systems without carbonization.”
– Advanced Driveline Engineering Report
Technology Highlights
Nano-Diamond Thermal Bridges: 5nm diamond particles create heat channels, reducing gear mesh temps by 130°C+
Fluoropolymer Tribofilm: Forms 80nm sacrificial layer with self-repairing capability under >4GPa loads
Centrifugal Stabilization: Magnetic nanoparticles prevent additive separation at 50,000g forces
Micro-Arc Prevention: Dielectric enhancers eliminate electrical pitting in HV hybrid drivetrains
Technical Support & Samples
Our advanced transmission oil additive package is backed by comprehensive technical support and formulation expertise for specialized applications.
✉️ Email:jzsrunda@163.com
