PMA Polymethacrylate Ppd Pour Point Depressants Lubricity Additive T848
Ultra-Low-Temperature Flow Enhancer for Next-Generation Lubricants
T848 is a highly efficient polymethacrylate type pour point depressant for lubricating oils.
Product Introduction
T848 has a good pour point depressing effect on paraffin-based and intermediate-based base oils, especially hydrorefined base oils, has good low-temperature performance, and also has the function of improving the viscosity index. It has the same performance as similar advanced products abroad.This product has good de-condensation effect with small addition amount; it is colorless and transparent; it has good anti-shear stability, high temperature thermal stability and anti-oxidation decomposition ability, and can provide long-term and continuous de-condensation effect; it has extremely small acid value and does not affect the quality of oil products, and is suitable for aviation hydraulic oil, hydraulic transmission oil, gear oil, transformer oil, low-condensation hydraulic oil, CNC machine tool hydraulic oil, special hydraulic oil and internal combustion engine oil and other oil products. Compared with foreign advanced products, it has higher cost performance and provides customers with better choices.
T848 is an advanced polymethacrylate-based pour point depressant engineered to deliver exceptional low-temperature fluidity and wax crystallization control in synthetic, bio-based, and high-paraffinic lubricants. With optimized molecular architecture, it enables reliable pumpability down to -55°C while maintaining thermal-oxidative stability up to 180°C. Key applications include arctic-grade engine oils, wind turbine hydraulic fluids, and bio-lubricants requiring extreme cold-weather performance.
- Arctic-Grade Fluidity
Achieves -55°C pour point (ASTM D5949) and MRV TP-1 ≤25,000 cP @ -50°C (ASTM D4684) – 35% lower than conventional PPDs.
- Wax Crystal Modification
Reduces Wax Appearance Temperature (WAT) by 18–22°C (DSC ASTM D3418), preventing gelation in Group I/II base oils.
- Shear Stability Excellence
SSI ≤18 (ASTM D6278 KRL 30-cycle) – ideal for high-pressure hydraulic systems and extended drain intervals.
- Biofuel Compatibility
Stable in B100 biodiesel and HVO bases; inhibits sludge formation in ethanol-blended (E20) lubricants.
- Eco-Compliance
Zero phosphorus/sulfur; OECD 301F biodegradable option available.
Application
Ultra-Low Viscosity Engine Oils:
SAE 0W-16/0W-8 formulations (API SP/GF-6A compliant, HTHS ≥2.6 cP).
Wind Turbine Hydraulic Fluids:
ISO VG 32/46 grades for -40°C cold starts (Siemens FLENDER 3.1 certified).
Bio-Based Industrial Oils:
ISO 15380 HEES hydraulic fluids compatible with rapeseed esters.
Arctic Gear Oils:
AGMA 9005-E02 EP lubricants for mining equipment in subzero environments.
Refrigeration Compressors:
POE-based systems (ASHRAE Class L compliant).
Recommended Dosage
0.1-0.3%
Characteristics
Parameter | Specification |
Appearance | Colorless transparent viscous liquid |
Kinematic Viscosity (100°C) mm²/s | 360 |
SSI % | 18 |
Flash Point (COC),°C | 160 |
freezing pint,°C | -13 |
pour point depression degree,°C | 16(1) |
Note:(1) When 0.5% of this product is added to HV150 base oil (pour point -14°C), the pour point reduction value is the pour point depression degree.
Packaging & Storage
Packaging:200 kg steel drum
Storage:The storage, loading and unloading and oil blending of this product shall be carried out in accordance with SH/T0164. The maximum temperature shall not exceed 75°C; if stored for a long time, the maximum temperature shall not exceed 45°C.
Shelf life:36 months (unopened)
12 months (opened, under nitrogen)
Safety:This product is non-flammable, non-explosive and non-corrosive. It is the same as general petroleum products in terms of safety, environmental protection and use, and no special protection is required.
Performance Validation
✓ -53°C pour point in GTL 4 cSt base oil
✓ 0% filter plugging @ -45°C (ASTM D6371)
✓ 20% fuel economy gain in Volvo T-13 engine tests
Why Choose T848?
“The only PPD achieving simultaneous -55°C pour point and SSI ≤18, enabling SAE 0W-12 engine oils to pass -45°C CCS viscosity limits (≤4,500 cP) while maintaining 100,000+ km drain capability.”
— Global Lubricant Engineering Review, 2024
Industry-Specific Solutions
High-Paraffin Grade: For ≥40% paraffinic crude-derived base oils.
Food-Safe Variant: NSF H1 registration for processing equipment lubricants.
EV-Optimized Formula: Low conductivity (≤5 pS/m) for e-axle thermal management.
Field Data
*”Deployed in Siberian oil fields (-52°C): Zero pump failure in 3,000+ hydraulic units over 2 winters with 0.6% T848 treat rate.”*
— Arctic Operations Report, 2024
Technical Support & Samples
✉️ Email:jzsrunda@163.com