Demulsifier Additive Amine And Epoxy Compound Condensation Product T1001
High-Efficiency Demulsifier Additive
T1001 is a demulsifier with significant effects. It has high degradation performance and water extractability. It has good effects on fresh or degraded lubricating oils. It has a synergistic effect when used with dodecenylsuccinic acid. This product is mainly used for gear oil, turbine oil, anti-wear hydraulic oil, compressor oil and other lubricating oils that come into contact with water during operation.
Product Introduction
T1001 is a high-efficiency amine-epoxy compound condensation demulsifier engineered for rapid oil-water separation in industrial lubricants exposed to water ingress. Utilizing synergistic molecular design, it enhances water shedding and prevents emulsification in gear oils, turbine oils, and hydraulic systems operating under humid or washdown conditions. Compliant with ISO 4406 cleanliness standards, it ensures equipment protection and extended oil life.
Key Features
- Rapid Demulsification Performance
Achieves <15-minute water separation (ASTM D1401) in contaminated oils—critical for turbines and gearboxes exposed to moisture.
Synergistic with T746 (dodecenyl succinic acid), boosting corrosion inhibition while maintaining foam stability.
- Broad Oil Compatibility
Effective in fresh and degraded lubricants (e.g., oxidized turbine oils), restoring demulsibility without affecting anti-wear additives.
Stable in mineral/synthetic base oils (Group I-V) and ester-based fluids.
- Environmental & Operational Safety
Low treat rate (0.05–0.30%) minimizes ecological impact while meeting biodegradability standards (OECD 301F).
Non-corrosive, non-foaming, and thermally stable ≤110°C.
- Acid Neutralization Support
Reduces hydrolytic acid buildup in wet environments, complementing TBN additives in circulating oils.
Application
Target Systems:
Industrial gear oils (ISO VG 68-680).
Steam/gas turbine oils (DIN 51515).
Hydraulic fluids (ISO 11158 HM/HV).
Compressor oils exposed to condensate.
Recommended Dosage
This product is added at 0.05%-0.3% when preparing oil products.
Formulation Guidance:
For high-water-cycling systems (e.g., paper mill hydraulics): Combine with 0.05% T746 for enhanced rust protection.
In ester-based fluids: Pre-test solubility at 60°C to ensure clarity.
Characteristics
Parameter | Specification | Test Method |
Appearance | Dark brown red liquid | Visual |
Kinematic Viscosity (100°C),mm²/s | 14-23 | GB/T265 |
Nitrogen Content,%(m/m) | 0.40-0.65 | SH/T0224 |
Flash Point (COC),°C | ≥110 | GB/T3536 |
Moisture,%(m/m) | ≤0.25 | GB/T260 |
Acid value,mgKOH/g | 60-90 | GB/T264 |
Mechanical Impurity,% | ≤0.05 | GB/T511 |
Packaging & Storage
Packaging:25Kg/200 kg steel drum
Storage:The storage, loading and unloading and oil blending of this product shall be carried out in accordance with SH/T0164. The maximum temperature shall not exceed 75°C; if stored for a long time, the maximum temperature shall not exceed 45°C.
Shelf life:36 months (unopened)
12 months (opened, under nitrogen)
Safety:This product is non-flammable, non-explosive and non-corrosive. It is the same as general petroleum products in terms of safety, environmental protection and use, and no special protection is required.
Why Choose T1001?
Proven Field Performance: 40% faster water separation versus alkylphenol demulsifiers in ISO VG 320 turbine oils.
Cost Efficiency: Ultra-low dosage reduces operational expenses by ≤15% versus conventional additives.
Eco-Compliance: Near-zero sulfur/phosphorus preserves water treatment systems.
Technical Support & Samples
✉️ Email:jzsrunda@163.com